Call Us
85612441
Email Us
info@penetronph.com
Address
Antipolo City 1870
Call Us
85612441
Email Us
info@penetronph.com
Address
Antipolo City 1870
DESCRIPTION : PENESEALTM FH is a clear, reactive penetrating sealer for concrete and masonry building materials designed to permanently protect, preserve and strengthen them. PENESEALTM FH penetrates deep into concrete and reacts with the elemental concrete ingredients to solidify them into a harder, denser, stronger concrete mass. Alkali salts and minerals are flushed out in the process, eliminating efflorescence and leaching and increasing bonding of surface coatings.
Any cementitious based substrate such as, but not limited to: concrete, terrazzo, heavyweight concrete block, plaster, stucco or mortar.
Warehouses
Hangars
Distribution and storage facilities
Food processing plants
Manufacturing facilities
Any type of facility with exposed concrete flooring
DIRECTIONS FOR USE
Surface preparation:
Surfaces to be treated should have an open pored surface so that PENESEALTM FH can
be absorbed. Remove all coatings, form oils, curing or sealing agents through chemical
or mechanical means. Remove dust, dirt, laitance or any other contaminants by
sweeping all areas to be treated with a fine bristle broom or scrub brush. Hose off with
water and let dry. Remove any standing or puddled water to avoid dilution of PENESEAL
TM FH before it is able to penetrate the surface.
Mixing:
PRIOR TO USE, agitate bucket or drum and thoroughly mix PenesealTM FH with clean water in equal parts by volume.
Installation:
PENEGUARDTM is ready to use, and no dilution is required.
Apply with low pressure sprayer and a microfiber or synthetic cloth.
Application methods:
Spray or pour followed by brooming or squeegeeing to saturate the surface.