Call Us

85612441

Email Us

info@penetronph.com

Address

Antipolo City 1870

PENESEAL PRO®

DESCRIPTION : PENESEAL PRO® is a spray applied liquid sealer which forms a sub-surface barrier that protects concrete against water penetration and seals hairline cracks. When sprayed onto a thoroughly cleansed concrete surface, it will react with the concrete to form a sub-surface gel. This gel seals the pores, capillaries and cracks. As long as water is present, the product will remain active and seal future hairline cracks.



Because of its ability to withstand thermal stress, PENESEAL PRO® is ideal for concrete roofs, podium decks, bridge decks, terraces, traffic bearing structures, runways, and driveways. In short, everywhere concrete is directly exposed to the elements and considerable thermal stress can be expected. For below ground projects, Penetron is the proven system of choice.


DIRECTIONS FOR USE

Surface preparation:

Surface damage, such as honeycombs, voids, etc. must be routed out & repaired with PENECRETE MORTARTM.

Surface should be minimum 14 days old (28 days is recommended),clean,free of dust and dry (no damp areas!)

Any formwork oil, curing compounds or previous treatments should be completely removed.

Temperature should be between 41° and 95°F (5° and 35°C.)

Avoid application when rain is imminent or in heavy wind.

Old concrete and concrete affected by carbonation may need to be treated with calcium for adequate reaction.

Application methods:
The product can be applied using simple hand spraying equipment for small areas to motorized spray units for large projects. With a simple backpack spray unit, coverage of 120-180 sq yards (100-151 m2) per hour can be achieved. After application all equipment should be thoroughly cleaned with water. Contact your Penetron representative for further details on spraying equipment.

NOTE:
Note: PENESEAL PRO® is ready to use and not to be diluted with water.


VIEW OTHER PRODUCTS



INTERESTED? GET IN TOUCH WITH US